top of page
Search

Behind the Project: From Torch-on to LEAKSEAL®. A Complete Roof Restoration.

Oct 1
3 min read

A roof waterproofing system is only as effective as the surface it is applied to and the preparation carried out beforehand. When an existing waterproofing system is being replaced, removing the old system provides an opportunity to inspect the underlying substrate, identify areas requiring repair and address drainage issues before installing the new system.


For this recent roof restoration project, Nsimeko Projects removed the existing torch-on waterproofing from the roof and parapet areas before preparing the concrete slab for a new LEAKSEAL® waterproofing system.


Behind the Project: From Torch-on to LEAKSEAL®. A Complete Roof Restoration.

The restoration involved several stages, including cleaning and assessing the existing slab, repairing cracks, correcting the screed falls, replacing the gutters and downpipes, and finally installing the new waterproofing system.


In this article, we take you through the project step by step — and explain why each stage is an important part of a properly prepared roof.


Step 1: Removing the Existing Torch-on System


The first stage was the complete removal of the existing torch-on waterproofing from the roof and parapet areas.


Removing the old membrane allowed us to expose the concrete slab underneath and properly assess its condition before moving forward.


This is an important part of a roof restoration project. By removing the existing waterproofing, we can identify areas that may need attention and make sure the substrate is properly prepared for the new system.


  • Torch-on Removal Done By Nsimeko Projects.
  • Torch-on Removal Done By Nsimeko Projects.
  • Torch-on Removal Done By Nsimeko Projects.
  • Torch-on Removal Done By Nsimeko Projects.

Torch-on Removal Done By Nsimeko Projects.


Step 2: Chemical Cleaning and High-Pressure Washing


Once the torch-on system had been removed, the concrete slab was chemically cleaned and high-pressure washed.


This helped remove dirt, residue and other contaminants from the surface, leaving a clean substrate ready for inspection and further preparation.


Proper surface preparation is essential when installing a waterproofing system. The condition and cleanliness of the substrate can have a direct impact on how effectively the new system bonds and performs.


Chemical Clean in Progress Before the High-Pressure Wash.


Step 3: Assessing the Existing Slab & Attending to the Cracks in the Surface Beds


With the roof clean and exposed, we could assess the condition of the existing concrete slab.


This allowed us to identify areas requiring repair before the new waterproofing system was installed.


As part of the assessment, cracks in the surface beds were identified and attended to.


Repairing cracks before waterproofing helps create a more suitable surface for the new system and addresses potential weak points before the waterproofing is applied.


Taking care of these repairs as part of the preparation process helps ensure that the new waterproofing system is installed onto a properly prepared substrate.


  • Assesment of The Slab to Identify Cracks and Which Areas Need to be Attended to.
  • Assesment of The Slab to Identify Cracks and Which Areas Need to be Attended to.
  • Assesment of The Slab to Identify Cracks and Which Areas Need to be Attended to.

Assessment of The Slab to Identify Cracks and Which Areas Need to be Attended to.


Step 4: Correcting the Screed Falls


The existing screed falls also required rectification.


Using self-levelling screed, we corrected the falls to improve the movement of water across the roof surface.


Correct falls are particularly important on flat roofs. A waterproofing system protects the roof from water ingress, but effective drainage helps prevent water from sitting on the roof for extended periods.


Addressing the falls was therefore an important part of the overall roof restoration.


  • Correcting the Screed Falls
  • Correcting the Screed Falls
  • Correcting the Screed Falls

Screed Work in Progress.


Step 5: Removing and Replacing the Gutters and Downpipes


The existing gutters and downpipes were removed as part of the project.


Nsimeko Projects then designed, manufactured and installed new box gutters and downpipes for the roof. The new gutters were also waterproofed as part of the installation.


Good rain water management is an important part of any waterproofing solution. Ensuring that water can be effectively collected and directed away from the roof helps support the overall performance of the system.


  • Removing and Replacing the Gutters and Downpipes
  • Removing and Replacing the Gutters and Downpipes
  • Removing and Replacing the Gutters and Downpipes
  • Removing and Replacing the Gutters and Downpipes

Removing and Replacing the Gutters and Downpipes.


Step 6: Installing the New LEAKSEAL® Waterproofing System


Once all preparation, repairs, screed falls and drainage work were completed, we could move on to the final stage.


A Deep Penetrating Primer was applied to the prepared surface before applying LEAKSEAL® FibreSeal Blue Waterproofing, with membrane also applied to the parapet areas, followed by LEAKSEAL® Polyurethane 250 top coat. Together, these layers form the new waterproofing system, providing a continuous protective finish across the restored roof.


  • LEAKSEAL® Waterproofing System
  • LEAKSEAL® Waterproofing System
  • LEAKSEAL® Waterproofing System
  • LEAKSEAL® Waterproofing System

In Progress: Installing the New LEAKSEAL® Waterproofing System.


Professional Waterproofing and Roof Restoration in South Africa


Every roof is different, and the right waterproofing solution starts with understanding the existing condition of the roof and preparing it accordingly.


  • Nsimeko Projects Waterproofing
  • Nsimeko Projects Waterproofing
  • Nsimeko Projects Waterproofing
  • Nsimeko Projects Waterproofing

Waterproofing System Completed by Nsimeko Projects.


At Nsimeko Projects, we provide commercial and industrial waterproofing, roof restoration, roof repairs, gutter waterproofing and building maintenance solutions.


From torch-on waterproofing removal and flat roof restoration to complete waterproofing system installations, our team focuses on doing the preparation properly and building the solution from the substrate up.


Need professional waterproofing or roof restoration? Get in touch with Nsimeko Projects to arrange a site assessment and discuss your project with our team.



 
 
 

Comments


About Us

At Nsimeko Projects, we provide reliable construction and interior solutions tailored to every project. Backed by quality craftsmanship and a commitment to excellence, we help bring your vision to life.

DWASA

Nsimeko Projects is Accepted as a Full Member of the Damp Proofing & Waterproofing Association of Southern Africa (DWASA).

Nsimeko Projects | 2026 All Rights Reserved 

Contact Us

106 De Wet Street, Krugersdorp North, 1741

bottom of page